cable

> solid bare copper > core insulation of halogen-free polymer (HI 2) > layer of plastic foil > static screen of plastic coated aluminium foil with drain wire 0,6mm or 0,8mm > outer sheath of halogen-free polymer (HM 2) red with the marking "BRANDMELDEKABEL" (fire alarm cable)

> Fire detection cable – high-quality cable, the outer sheath is made of fire-resistant PVC. It can be used for alarm signals and for message transmission, call points & extensions, as well as for transmitting measurement data. > Installation – cable can be easily installed in damp and dry rooms as well as on exterior walls and under plaster. > Specification – fire behaviour: Eca | flame retardant. The fire alarm cable meets the professional, technical standards applicable to fire alarm cables

> Signal transmission. > At instrumentation and control engineering. > At industrial electronics. > Indoor communication systems. > Indoor sound systems. > Security and fire alarm systems. > In places where human life, valuable materials and equipments need to be protected.

> Signal transmission. > At instrumentation and control engineering. > At industrial electronics. > Indoor communication systems. > Indoor sound systems. > Security and fire alarm systems. > In places where human life, valuable materials and equipments need to be protected.

Unifire ® JE-H(St)H...Bd FE 180 / PH 120 1 X 2 X 1,50 mm² + 0,80 mm Is a fire-resistant cable used to install fire alarm systems. The wire is 1x2x1,5 which helps to increase the distance.

> 2-core cable > Copper multicore conductor 1.00mm² > Flame-resistant PVC insulation > Shielded (aluminum foil) > Standard CEI 20-22 II (IEC 60332-3) > ominal operating voltage 200V > Operating temperature from -15° to +85°C > 100-meter coil

> 2 wire cable, copper single-wired conductor 0.80mm², shielded (aluminum foil), PVC insulation, standard CEI 20-22 II (IEC 60332-3), nominal voltage 200V, working temperature from -20º up to +85ºC, package 100 m

> 2 wire cable > Copper stranded conductor 1.00mm² > Hard to burn PVC insulation > Shielded (aluminium foil) > CEI 20-22 II standard (IEC 60332-3) > Rated operating voltage 400V > Operating temperature -15° to +80° C > Packaging 100 metres

> Tubolar jacket in white/red PVC flame retardant according to > ELAN A.F. - CEI 20/22 III - CEI 36762 C-4 (U0=400V) -CE “data” > Nastro accoppiato ALL/POL - Overall Aluminium/Polyester foil > Filo di drenaggio rame stagnato - Drainage wire tinned copper

Conduttore interno     flessibile in rame rosso  Conductor      stranded bare copper conduttore da 0,50 mm2       rame rosso 9 x 0,250 0,50mm2 wire    bare copper 9 x 0,250                         diametro diameter Ø 1,60 mm conduttore da 1,00 mm2         rame rosso 18 x 0,250 1,00mm2 wire           bare copper 18 x 0,250                                     diametro diameter Ø 2,20 mm conduttore da 1,50 mm2          rame rosso 28 x 0,240 1,50mm2 wire           bare copper 28 x 0,240                                   diametro diameter Ø 2,50 mm

> Tubolar jacket in LSZH fire retardant according to > CEI 20-22/III (IEC 60332-3) regulations and with low smoke and zero halogen according CEI 20-37 (IEC 60754; IEC 61034;

305 m CAT5E UTP Network Cable (Solid Copper, 0.5 mm, CM) Full diameter 305 m CAT5E network cable Core diameter: 0.5mm Excellent transmission performance using solid copper Quality verified by Fluke test Guaranteed long PoE transmission distance Great PVC flame resistance.

> 10 BASE-T (IEEE 802.3) Ethernet > 100 BASE-T (IEEE 802.3u) Fast Ethernet > 100 VG-AnyLAN (IEEE 802.12) > 4/16 Mbps Token Ring (IEEE 802.5) > 100 Mbps CDDI > 52/155 Mbps ATM > 1000 BASE-T (Gigabit Ethernet) (IEEE 802.3 ab)

> Stable electrical performance, compliant with ANSI/TIA-568-C.2, IEC61156, ISO/IEC11801. > Compliant with RoHS 2.0. > Sheath with strong mechanical properties, and high tensile and compressive strength, reducing damage during the project. > Excellent performance in the Fluke 90-meter permanent link test while working continuously at 50°C high temperature. > Excellent performance in the Fluke 100-meter channel test while being continuously loaded with 57 V/1 A DC power (PoE). > Solid-Bare Copper conductor with less resistance, and better electrical properties and transmission performance.

> Conductor/insulator: 24 AWG solid copper insulated with HDPE polymer > Insulation diameter: 0.92-0.96mm (0.036-0.038 in.) > Flame rating: IEC 60332-1, IEC 60332-3-22, IEC 60754, IEC 61034, EN 50575: Dca-s2,d2,a1 > Cable jacket: LSFRZH > Cable diameter: 5.3mm (0.208 in.) nominal > Cable weight: 12 kg/305m (26 lbs./1000 ft.)

 10 BASE-T (IEEE 802.3) Ethernet > 100 BASE-T (IEEE 802.3u) Fast Ethernet > 100 VG-AnyLAN (IEEE 802.12) > 4/16 Mbps Token Ring (IEEE 802.5) > 100 Mbps CDDI > 52/155 Mbps ATM > 1000 BASE-T (Gigabit Ethernet) (IEEE 802.3 ab)

 operating temperature: -30 °C to 80 °C > min. installation temp: -10 °C > solid round copper conductors > special polyolefin compound

· 10 BASE-T (IEEE 802.3) Ethernet . 100 BASE-T (IEEE 802.3u) Fast Ethernet · 100 VG-AnyLAN (IEEE 802.12) · 4/16 Mbps Token Ring (IEEE 802.5) · 100 Mbps CDDI . 52/155 Mbps ATM · 1000 BASE-T (Gigabit Ethernet) (IEEE 802.3 ab)