Fire Alarm Systems

Technology: Addressable Systems Series: Enea Type: Addressable Thermal Detector Threshold Temperature: 58°C Maximum Current: 10mA@27.6V Certification: CE, EN 54-5, EN 54-17, Short Circuit Isolator: Included

Addressable Manual callpoint with resettable element. Weatherproof to IP67, suitable for outdoor installation.

The SmartLine020-4EXT fire extinguishing system is based on the SmartLine020-4 4-zone conventional fire detection system. The control unit offers 1 SmartLetLoose / ONE extinguishing channel and is able to offer all the functions of the conventional SmartLine020-4 control panel. The SmartLine020-4EXT extinguishing control unit can be interfaced with the addressed analog control units of the SmartLoop series to provide them with the necessary extinguishing functions. The interface is via the RS485 connection of which the extinguishing control unit is equipped. In this way it will be possible to program the SmartLine020-4EXT extinction control unit in order to activate its functions based on local information (conventional zones, extinction terminals, stop extinction, etc.) and remote information coming from the SmartLoop control unit.

Analog-addressable fire control panel 2 loops expandable to 8 for 2080 expandable models 1 loop on non-expandable 1010 models All models in the SmartLoop series are EN54 Approved Multiprocessor hardware structure 32 bit main CPU OpenLoop Technology HorNet token- ring architecture Supports Emergency54 emergency configuration (CPU redundancy) Manages up to 30 panel token-ring network via the SmartLoop/NET board (accessory item) Easy remote access through SmartLAN board (accessory item) 2 or 4 wire loop connection Supports 240 devices per loop Manages up to 8 remote-control Repeater panels connected to the RS485 Interface Manages power stations on the RS485 BUS Manages a fire-suppression control panel on the RS485 BUS 3 general purpose NAC outputs 1 NAC Alarm output 1 NAC Trouble output 1 dry contact Alarm relay 1 dry contact Trouble relay RS485 BUS for Repeater panel connections (SmartLetUSee/LCD and SmartLetUSee/LED) Manages SmartLine020-4EXT and SmartLine036-4EXT fire extinguishing control panels via RS485 BUS Manages up to 14 remote-control Repeater panels on the RS485 BUS (maximum wire length between panels 1000m)

Addition of a SmartLetLoose/ONE fire suppression board to any SmartLine or SmartLight series fire control panel provides the system with GAS suppression control capabilities in compliancy with EN12094-1. SmartLetLoose/ONE enhanced control panels provide all the functions required by the applicable normative and are capable of managing all devices required for fire extinction system management.

These audible signalling devices operate at 17 to 60 Vdc. Protection rating IP65 (IP 21 for the low-profile base). Complete with mounting base. They provide 32 tones configured by means of a DIP switch. The volume is easily adjusted using the internal trimmer