Conventional system

The fire detector provides reliable early warning of a Fire condition responding to fixed threshold smoke concentration or rate of rise of the temperature or fixed temperature threshold detected in the protected premises.

DB 8000 – Standard Base – Common base, applicable for the standard fire alarm installations. DB 8000D – Base with schottky diode – Further improvement of the operation reliability through the built-in diode for removed fire detector application. DB 8000R – Base with relay output – trigger base with built-in relay output, applicable for burglar fire alarm systems, etc. DB 8000DR – Base with schottky diode & resistor – Combined current threshold base and build-in Diode base for reliability improvement and compatibility.

DB 8000 – Standard Base – Common base, applicable for the standard fire alarm installations. DB 8000D – Base with schottky diode – Further improvement of the operation reliability through the built-in diode for removed fire detector application. DB 8000R – Base with relay output – Тrigger base with built-in relay output, applicable for burglar fire alarm systems, etc. DB 8000DR – Base with schottky diode & resistor – Combined current threshold base and build-in Diode base for reliability improvement and compatibility.

Connection base for 200 and 200A series detectors. It has an anti-theft detector system. Stainless steel contacts. White color. Dimensions: 5 x 100 mm.

Deep connection base for 200 and 200A series detectors. It has an anti-theft detector system. Stainless steel contacts. Ceiling mounted with conduit entris for standars 20mm conduit. White color. Dimensions: 43 x 100 mm.

Connection base with relay output for 200 series detectors. Detector anti-theft system available. Stainless steel contacts. White color. Dimensions: 5 x 100 mm.

Conventional heat detector (fixed temperature 78ºC). Led status indicator and output for remote pilot indicator PAD-10. White color. Allows installation without polarity. Requires connection base Z-200 or Z-200-H. Anti-theft system (only with Z-200). CPR certificate EN 54-5. Dimensions: 100 x 40 mm.

Green resettable alarm button for emergencies, surface mounting. Indoor use. Dimensions 98x98x48mm.

Conventional manual call point, with test key, for surface installation. Suitable for indoor. Red color. Includes resistance of 100 Ohm.-2W. Dimensions: 98 x 98 x 48 mm. CPR certificate EN54-11.

Conventional optical and heat detector. Led status indicator and output for remote pilot indicator PAD-10. White color. Allows installation without polarity. Requires connection base Z-200 or Z-200-H. Anti-theft system (only with Z-200). CPR certificate EN 54-5 and EN 54-7. Dimensions: 100 x 40 mm.

Indoor alarm sounder with beacon. 32 selectable tones. Power at 24Vdc / 8mA at 36mA according to tone. IP33C. Red color. Acoustic power 78 to 116 dB according to tone. CPR certificate EN54-3. Dimensions: 100 x 75 mm.

The fire detector provides reliable early warning of a Fire condition upon ambient temperature reaching a fixed temperature threshold. It is available in two versions (A2S or BS) depending on the temperature threshold in accordance with the European Standard EN54-5. The fire detector is suitable for premises with normal or high ambient temperature, with possible sudden changes.

Fire control panel FS4000 is designed to operate with conventional automatic fire detectors and manual call points. The panel has outputs provided for external executive devices.

– Maximum number of fire detectors in a line: 32 – Connecting line: two-wire – Maximum resistance of a line: 100

 Fire control panel FS4000 is designed to operate with conventional automatic fire detectors and manual call points. The panel has outputs provided for external executive devices.

Conventional fire alarm control panel for 2 zones mounted on ABS plastic housing. Flush mount option. Discriminates between detector alarm and manual call points alarm. Up to 32 detectors per zone. Possibility to connect to PC via USB for complex programming. Integrable to addressable systems directly to the loop. It has 2 configurable supervised sounder outputs (500 mA each output), alarm and fault relay outputs free of voltage, auxiliary 24V output (500 mA maximum consumption), 24V resettable output (500 mA maximum consumption) and 1 programmable external input. TSD100: 4 supervised sounder outputs, TMD-100: Modbus output for integrations, TPLD-100: integration to addressable loop). Tele maintenance and remote control through TED-151-CL card (Detnov Cloud). Multilingual keyboard. CPR certificate EN54-2 ,EN54-4 and EN54-13. Dimensions: 443 x 268 x 109 mm. Requires 2 BTD-1207 batteries (not included).

Conventional fire alarm control panel for 4 zones mounted on ABS plastic housing. Flush mount option. Discriminates between detector alarm and manual call points alarm. Up to 32 detectors per zone. Possibility to connect to PC via USB for complex programming. Integrable to addressable systems directly to the loop. It has two configurable supervised siren outputs (500 mA each output), alarm and fault relay outputs free of voltage, auxiliary 24V output (500 mA maximum consumption), 24V resettable output (500 mA maximum consumption) and 1 external input programmable. TSD100: 4 supervised siren outputs, TMD-100: Modbus output for integrations, TPLD-100: integration to addressable loop). Tele maintenance and remote control through TED-151-CL card (Detnov Cloud). Multilingual keyboard. CPR certificate EN54-2 ,EN54-4 and EN54-13. Dimensions: 443 x 268 x 109 mm. Requires 2 BTD-1207 batteries (not included).

Conventional fire alarm control panel for 4 zones mounted on ABS plastic housing. Discriminates between detector alarm and manual call points alarm. Up to 32 detectors per zone. It has 2 configurable supervised sounder outputs (500 mA each output), alarm and fault relay outputs free of voltage, auxiliary 24V output (500 mA maximum consumption), 24V resettable output (500 mA maximum consumption). Sounder output delay configurable on board Multilingual keyboard. CPR certificate EN54-2 and EN54-4. Dimensions: 282 x 240 x 102 mm. Requires 2 BTD-1202 batteries (not included).