Detectors

Photoelectric smoke sensing chamber technology Integrated indicator provides visual indication of an alarm condition Test and Hush features in a single button Test and Hush visual indicator Test button verifies battery and alarm operation Hush function temporarily silences unwanted alarms Loud 85 dB sounder to alert occupants No limit for interconnectable units using the wireless transmission path Interconnectable smoke alarms configure into groups Smoke chamber fault audible indication Hush function temporarily silences smoke chamber fault indication Surface-mount device (SMD) circuit board design Up to 10 years operation under normal conditions Low battery warning signal Hush function temporarily silences low battery indication Attractive housing design Easy installation Low maintenance

Detects propane (Natural) gas Stable gas sensing chamber. No adjustment or replacement required Displays gas concentration levels as LEL percentage Displays current ambient temperature High immunity against unwanted alarms Voice messages alerts building occupants Loud 85 dB internal alarm sounder Dedicated test control Separate indicators for Alarm, Fault and Power Wi-Fi connection to wireless access point and smart home application available on some models AC plug-in mains power Low power consumption Attractive housing design Easy installation. No programming required

4-Wired Smoke Detector Advanced algorithms provide advanced detection discrimination Sleek low-profile housing design Stable photoelectric smoke sensing chamber. No adjustment or replacement required High immunity against unwanted alarms Surface-mount device (SMD) circuit board design Dual LEDs for 360° visibility 4-wire models for DC 12 V operation 4-wire models include a N/C or N/O alarm relay output

Addressable heat (58°C fixed temperature and thermal rate of rise) detector, with algorithm verification. Led status indicator and output for remote pilot indicator PAD-10 or buzzer BUD-200. Black color. Allows installation without polarity. Requires base Z-200-B or Z-200-B-H. Anti-theft system (only with Z-200). CPR certificate EN 54-5. Dimensions: 100 x 40 mm.

Part number HNA-360-H2 Detector type Heat; Wires 2; Other features Compatitable with main intelligent fire systems (f.e.: INIM, GFE etc.) Supply voltage 17~28V; Power consumption (standby) 260uA Power consumption (alarm) 2mA

Part number HNA-360-HL Detector type Heat; Wires 4; Alarm contact Remote LED; Other features Compatitable with main intelligent fire systems (f.e.: INIM, GFE etc.) Supply voltage 17~28V; Power consumption (standby) 260uA Power consumption (alarm) 2mA

Addressable optical & heat detector with built-in isolator, with dirt compensation and algorithm verification. Led status indicator and output for remote pilot indicator PAD-10 or buzzer BUD-200. White color. Requires connection base Z-200 or Z-200-H. Anti-theft system (only with Z-200). CPR certificates EN 54-5, EN 54-7 and EN 54-17. Dimensions: 100 x 40 mm.

Addressable optical & heat detector with built-in isolator, with dirt compensation and algorithm verification. Led status indicator and output for remote pilot indicator PAD-10 or buzzer BUD-200. White color. Requires connection base Z-200 or Z-200-H. Anti-theft system (only with Z-200). CPR certificates EN 54-5, EN 54-7 and EN 54-17. Dimensions: 100 x 40 mm.

Addressable high temperature detector (fixed at 78ºC) with built-in isolator, with algorithm verification. Led status indicator and output for remote pilot indicator PAD-10 or buzzer BUD-200. White color. Requires connection base Z-200 or Z-200-H. Anti-theft system (only with Z-200). CPR certificate EN 54-5 and EN 54-17. Dimensions: 100 x 40 mm.

Addressable manual call point with built-in isolator. LED status indicator and test key. Red color. CPR certificates EN54-11 and EN54-17. Dimensions: 98 x 98 x 48 mm.

The 71CNG detector is applicable for detection of natural gas (methane) in the protected area. The status of the detector is indicated with its built-in LEDs and built-in Sounder and meanwhile monitored and controlled from the IFS7002 addressable fire control panel.

Addressable optical smoke detector, with dirt compensation and algorithm verification. Led status indicator and output for remote pilot indicator PAD-10 or buzzer BUD-200. White color. Allows installation without polarity. Requires connection base Z-200 or Z-200-H. Anti-theft system (only with Z-200). CPR certificate EN 54-7. Dimensions: 100 x 40 mm.

Addressable optical smoke detector with built-in isolator, with dirt compensation and algorithm verification. Led status indicator and output for remote pilot indicator PAD-10 or buzzer BUD-200. White color. Requires connection base Z-200 or Z-200-H. Anti-theft system (only with Z-200). CPR certificate EN 54-7 and EN 54-17. Dimensions: 100 x 40 mm.

Part number SNA-360-S2 Detector type Smoke; Wires 2; Supply voltage 17~28V; Power consumption (standby) 260uA Power consumption (alarm) 2mA

Part number SNA-360-SL Detector type Smoke; Wires 4; Alarm contact Remote LED; Other features Compatitable with main intelligent fire systems (f.e.: INIM, GFE etc.) Supply voltage 17~28V; Power consumption (standby) 260uA Power consumption (alarm) 2mA

Part number SNA-360-C2 Detector type Smoke and heat; Wires 4; Other features Compatitable with main intelligent fire systems (f.e.: INIM, GFE etc.) Supply voltage 17~28V; Power consumption (standby) 260uA Power consumption (alarm) 2mA

Part number SNA-360-CL Detector type Smoke and heat; Wires 4; Alarm contact Remote LED; Other features Compatitable with main intelligent fire systems (f.e.: INIM, GFE etc.) Supply voltage 17~28V; Power consumption (standby) 260uA Power consumption (alarm) 2mA

FD7204D is applicable for sound and LED indication of events registered in Interactive Fire Alarm System IFS7000. FD7204D is certified on EN54-3.