სხივის დეტექტორი,FIREBEAM BL Beam Detector
Please sign in so that we can notify you about a reply
| Electrical Specifications: | |
|---|---|
| Supply Voltage | 12 to 30 Vdc normal |
| Supply Current | 5.5mA in all operational states |
| Supply Current | 13.5mA in fast commissioning |
| Environmental Specifications: | |
| Temperature | -10°C to +55°C |
| Humidity | 10 to 95% RH Non-condensing |
| Protection Index | IP65 when suitably mounted and terminated |
| Mechanical Specifications: | |
| Beam Head | H:180mm x W:155mm x D:137mm - Weight 1.1kg |
| 70KIT140 Mid-Range Reflector | H:293mm x W:293mm x D:5mm - Weight 0.8kg |
| 140KIT160 Long-Range Reflector | H:394mm x W:394mm x D:5mm - Weight 1.8kg |
| Adapter | H:270mm x W:250mm x D:5mm - Weight 0.6Kg (mounts the Beam Head onto Unistrut) |
| Optical Specifications: | |
| Optical Wavelength | 870nm |
| Maximum Angular Alignment | ±5° |
| Maximum Angular Misalignment | (static not auto-aligning) Beam Head ±0.4° / Reflector ±2° |
| Operational Specifications: | |
| Protection Range | |
| Fire Beam BLUE | Standard Product 7 to 70 metres. Use short range mask for distances between 7 & 20 metres |
| 70KIT140 | Mid-Range Reflector Kit 70 to 140 metres |
| 140KIT160 | Long Range Reflector Kit 140 to 160 metres |
| Alarm Sensitivity Levels | |
| 25% (1.25dB) to 50% (3dB) in 1% (0.05dB) increments (default 35% (1.87dB)) | |
| Alarm Condition: | |
| Obscuration drops to below pre-defined sensitivity level. | |
| Time to Alarm Condition adjustable between 2 to 30 seconds in 1 second increments (default 10 seconds) | |
| Alarm Indication: | |
| App Status - FIRE | |
| Head Red Flashing LED | |
| Alarm Relay Change Over (CO) Contact | |
| Rating 2A @ 30 VDC | |
| Test / Reset Features: | |
| Beam test function with App | |
| Alarm latching / auto-reset selectable (default auto-reset) | |
| Alarm reset in latching mode with App reset function, removing power for >5 seconds or momentarily apply >5 VDC to reset connections in Beam Head | |
| Fault Sensitivity Level: | |
| <4>#/td### | |
| Fault Condition: | |
| Obscuration drops to below the fault sensitivity level within 1 second | |
| Power Down or Supply Voltage < 9 VDC | |
| Commissioning modes, Pre-Alignment and Auto-Alignment | |
| Beam turned off during Beam Maintenance | |
| Time to Fault Condition adjustable, 2 to 60 seconds in 1 second increments (default 10 seconds) | |
| Fault Indication: | |
| App Status - FAULT | |
| Head Yellow Flashing LED 1 Second | |
| Fault Relay Change Over (CO) Contact Rating 2A @ 30 VDC | |
| Normal Condition: | |
| Obscuration level is above the Alarm sensitivity level | |
| App Status - NORMAL | |
| Programmable on/off | |
| Head Green Flashing LED | |
| Programmable on/off | |
| Auto-Align / Beam Contamination Compensation: | |
| Auto-align during normal operation if obscuration drops below 90% for the duration of the align time set (doesn't affect normal operating mode) | |
| Beam Contamination Compensation 4 hour monitoring. Compensation data available in the App | |